Dcx 2496 Firmware V1.18

• Dcx 2496 Firmware V1.18 Download

Jun 27, 2017  Behringer Ultradrive Pro Dcx2496 Crossover Software Download. Behringer Ultradrive Pro Dcx2496 Crossover Software Download. June 27, 2017. Shark 3D 1080P Ita Download Itunes. June 27, 2017. Behringer Ultradrive Pro Dcx2496 Crossover Software Download. June 27, 2017.

The DCX2496 ULTRADRIVE PRO from Behringer is a digital loudspeaker management system, that provides excellent audio quality, along with a comprehensive feature list. It allows for precise set-up of multiple loudspeaker arrays, suitable for live sound, fixed installations that require control of loudspeaker systems, and other contractor-installed applications.Each of the three-inputs and six-outputs have fixed processing blocks, including gain, delay, EQ and dynamic EQ on the input channels, and gain, crossover, EQs, limiter and delays on the output side. One of the inputs can accept a stereo AES/EBU digital signal. An integrated sample rate converter assists in accepting various sample rates. Additionally, an internal input-sum signal is easily set-up.Four different mono and stereo output operating modes are available, all with individual crossover filter types with selectable roll-off characteristics. Input and output delays allow for time adjusting signals to compensate for ambient temperature changes or for adjusting arrival time differences for individual speaker clusters.

EQs can be used for both musical enhancement or for level-dependent equalization. Brick-wall limiters guarantee speaker protection.Remote control of one or several units can be accomplished utilizing downloadable software for a Windows based computer. Set-ups can be saved to the software, or to an optional PCMCIA card for the ultimate in portability.

Servo-balanced, gold-plated XLR connectors for all inputs and outputs guarantee excellent connectivity. Rated 2 out of5 byoddiophool from2 out of 3 DOA Should have known, given Behringer's reputation, but we really needed these devices to multi-amp a couple of three-way systems. I ordered two (one for backup given the reputation issue) and a friend ordered one. Of the two I ordered, only one functioned properly when first turned on.

Dcx 2496 Firmware V1.18 Download

My friend wasn't even that lucky. So, one for three. Acceptable in baseball, but not for our needs. When my friend called in about his, he got a replacement in a week.

His return and the new unit must have crossed paths in shipping. I went the Email route, returned it, and then waited two+ weeks for the replacement (which thankfully works). Lesson: it pays to call and gripe. Rated 4 out of5 byTrumpet John fromBest digital crossover in price range I needed an eq, crossover and delay in my rack for 3 sets of speakers (bi-amped stage monitors) and after doing extensive research as well as being familiar with higher priced options, I decided on this unit. I highly recomend downloading and experimenting with the software before you purchase! I use the DBX driverack 260 in my main rack and have the JBL srx712m's tuned per JBL's specs with that unit but cannot enter exact specs into the Behringer - the software will not allow such fine tunning as the driverack!

At roughly half the price of the driverack, I decided the ULTRADRIVE PRO was an acceptable compromise. Rated 5 out of5 byRodney Danger fromBig Bang for the Buck I have many electronic crossovers by everyone from dbx to BSS. Since we keep the best stuff on the road it is packed up most of the time or not in the shop. I needed something for T&D that I can keep in the shop to test and tune cabinets. This has done the trick for me. It does sound good and I was able to set it up from the front panel in about 15 minutes for a 3 way stereo with delays, EQ and some limiting on the outputs to go with our boxes. Not hearing them side by side, but it works well and the setting changes measured in the shop worked out well on the BSS and Ashly's in the field.

I think we will get a few more and change out a monitoring rigs analog stuff. Rated 5 out of5 byAudiophile1150 fromExceptionally Versatile Tool I use the DCX2496 as part of my home theater sound system to provide a crossover to my pair of Definitive Tech Supercube subs and my 8 unit custom built front drivers as well as equalization for front and center speaker systems. The ability to precisely and independently control crossover frequency and filter type and then store settings in memory for use when switching to various input devices is phenomenal. I use a 1/3 octave graphic EQ but the additional parametric EQ of the DCX2496 adds precise control of frequencies between the available bands of the graphic. The precision phase control is useful in elimination of standing waves in my listening room with some troublesome recordings.

I plan to purchase another one soon since I can't imagine being without one now.

:Flag Ad:SOLDBehringer DCX2496 EEPROM - UN BRICK FROM BAD FIRMWARE FLASHPrice:$25.00Days/Views:42 / 2523 (Posted 2019-04-29)Condition:10/10 NewSeller:Feedback:Due to recent requests, I have burned a few more.Hello all,I was having some issues with my DCX2496 and determined that it was the EEPROM. My DCX2496 unit came with v1.16, but somehow something got tripped up and it would just lock up after a while.